Jim Dunlop MXR M75 Super Badass Distortion Guitar Pedal

The Super Badass Distortion provides a full and highly responsive spectrum distortion with a 3-band EQ to fine-tune your sound.

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).

Directions:

1. Run a cable from your guitar to the Super Badass Distortion’s Input jack and run another cable from the Super Badass Distortion’s Output jack to your amplifier.
2. Start with all controls at 12 o’clock.
3. Turn the effect on by depressing the footswitch.
4. Rotate the OUTPUT clockwise to increase volume or counterclockwise to decrease it.
5. Rotate the DISTORTION knob clockwise to increase amount of distortion or counterclockwise to decrease it.
6. Rotate the BASS knob clockwise to boost low frequencies or counterclockwise to cut them.
7. Rotate the MID knob clockwise to boost midrange frequencies or counterclockwise to cut them.
8. Rotate the TREBLE knob clockwise to boost high frequencies or counterclockwise to cut them.

Input Impedance 390 kΩ, 500 Hz
Output Impedance* 3.4 kΩ
Nominal Output Level -8 dBV
Signal to Noise* 93 dBV
Tone Controls
BASS +/-11 dB, 150 Hz
MID +/-12 dB, 500 Hz
TREBLE +/-10 dB, 10 kHz
Distortion Gain
15 dB to 76 dB, 1 kHz
Bypass True Hardwire
Current Draw 10 mA
Power Supply 9 Volts DC