Brand: JIM DUNLOP
MODEL: M132
Jim Dunlop MXR Super Comp Compressor Guitar Pedal
Store finder
The Super Comp Compressor updates the Dyna Comp® Compressor with an Attack Level control to preserve initial volume without sacrificing sustain.
This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).
Directions:
- Run a cable from your guitar to the Super Comp’s INPUT jack and another cable from the Super Comp’s OUTPUT jack to your amplifier.
- Start with all controls at 12 o’clock.
- Turn the effect on by depressing the footswitch.
- Rotate the OUTPUT knob clockwise to increase overall effect volume or counterclockwise to decrease it.
- Rotate the ATTACK LEVEL knob clockwise to reduce volume attenuation of note upon attack or counterclockwise to increase it. For the classic Dyna Comp sound, rotate this control fully counterclockwise.
- Rotate the SENSITIVITY knob clockwise to increase amount of compression or counterclockwise to decrease it.
Input Impedance 1 MΩ
Output Impedance 10 kΩ
Nominal Input Level -5 dBV
Nominal Output Level -12 dBV
Noise Floor* -95 dBV
T.H.D 0.2% Typ. at -20 dBV, 1 kHz
Maximum Compression 36 dB
Attack Time 5 ms
Release Time 1 s
Bypass True Hardwire
Current Draw 3.3 mA
Power Supply 9 volts DC
The Super Comp Compressor updates the Dyna Comp® Compressor with an Attack Level control to preserve initial volume without sacrificing sustain.
This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).
Directions:
- Run a cable from your guitar to the Super Comp’s INPUT jack and another cable from the Super Comp’s OUTPUT jack to your amplifier.
- Start with all controls at 12 o’clock.
- Turn the effect on by depressing the footswitch.
- Rotate the OUTPUT knob clockwise to increase overall effect volume or counterclockwise to decrease it.
- Rotate the ATTACK LEVEL knob clockwise to reduce volume attenuation of note upon attack or counterclockwise to increase it. For the classic Dyna Comp sound, rotate this control fully counterclockwise.
- Rotate the SENSITIVITY knob clockwise to increase amount of compression or counterclockwise to decrease it.
Input Impedance 1 MΩ
Output Impedance 10 kΩ
Nominal Input Level -5 dBV
Nominal Output Level -12 dBV
Noise Floor* -95 dBV
T.H.D 0.2% Typ. at -20 dBV, 1 kHz
Maximum Compression 36 dB
Attack Time 5 ms
Release Time 1 s
Bypass True Hardwire
Current Draw 3.3 mA
Power Supply 9 volts DC